RGT Technology, LLC . . .

Filter by Category
Filter by Manufacturer
Unavailable
Part Number Manufacturer Description Brand Price & Lead Time
CompactPCI CPU board, 0..+60°C MEN MIKRO Simple Type: - TBD - Request Quote
CPU Board MEN MIKRO Men Mikro CPU Boards Simple Type: CPU Board Request Quote
D3 MEN MIKRO Men Mikro D3 Series 6U CompactPCI PowerPC Single Board Computers | CPU Boards Simple Type: CPU Board Request Quote
D3a MEN MIKRO Men Mikro D3a Series 6U CompactPCI PowerPC Single Board Computers | with PC-MIPs Simple Type: CPU Board Request Quote
D4-02D004 MEN MIKRO Men Mikro D4-02D004 - Single-Board CPU | CompactPCI/PXI | Intel Pentium 4 Simple Type: CPU Board With the Mobile Pentium® 4 processor, the 845G chipset technology (400MHz local bus frequency) and its 64-bit/66-MHz bridge to the CompactPCI® bus (32-bit/33-MHz on board), the D4 is one of the most powerful 6U single-board computers today. Standard versions come with the 1.7 GHz and 2.2 GHz processors from the Intel® "Embedded Line". The D4 can operate as a system-slot card for any CompactPCI® or PXI™ system, with the system slot capable of being placed either left or right in the enclosure. The 1-slot D4 supports full hot swap and is compatible with PICMG 2.16 and the requirements of a server blade. The 845G chipset supports up to 1 GB of 200-MHz DDRAM. Application code is conveniently stored in a scalable CompactFlash® which is controlled via IDE. A second IDE channel allows direct connection of an onboard 2.5" hard disk. The chipset also features a DVI graphics controller which allows for attachment of both advanced and legacy flat-panel displays and CRT monitors. Three onboard USB ports provide universal interfaces to a variety of peripheral devices (such as keyboard, mouse, printer, modem, or camera). For high-speed networking and field bus interfacing, the D4 features two or three Gigabit Ethernet lines (depending on the model). Further interfaces include two COMs, keyboard/mouse, floppy and parallel ports. DVI, keyboard/mouse, 2 Gigabit Ethernet, 1 USB and 1 COM are conveniently available at the front panel of the D4. All the other functions are available via the rear I/O adapter. The rear I/O adapter is compatible with that of the MEN D2 CPU board (Pentium® MMX SBC) to provide an easy upgrade path from D2 to D4. Further flexible I/O extension is provided by using the two PC-MIP® slots or one PMC slot on the D4 CPU board. The mezzanine signals are provided at the front or via the rear I/O adapter. The Phoenix® BIOS on the D4 was especially designed for embedded system applications. Download the datasheet (PDF) Request Quote
D5 MEN MIKRO Men Mikro D5 Series 6U CompactPCI PowerPC Single Board Computers Simple Type: CPU Board Request Quote
D6 MEN MIKRO Men Mikro D6 Series 6U CompactPCI/PXI Pentium M Single Board Computers Simple Type: CPU Board Request Quote
DIN receptacles MEN MIKRO Simple Type: - TBD - Request Quote
Documentation MEN MIKRO Men Mikro Documentations Simple Type: Documentation Request Quote
DRAM Module MEN MIKRO Men Mikro DRAM Modules Simple Type: DRAM Module Request Quote
Driver Interface System MEN MIKRO Men Mikro Driver Interface Systems Simple Type: Driver Interface System Request Quote
EC05-R01 MEN MIKRO Men Mikro EC05-R01 Baseboard | With PCI Slot| 4 USB | LAN Connector Simple Type: Baseboard Request Quote
EK01 MEN MIKRO ESM Starter Kit with Tualatin Pentium III Simple Type: CPU Board Embedded System Modules are complete computers on a module. A final ESM-based embedded application consists either of a stand-alone ESM (the power supply connection being sufficient to operate the module), an ESM with an application-specific carrier card and/or an ESM with additionally plugged PCI-104 modules. The EK01 is a ready-to-use starter kit that allows evaluation of the functions of the EM02 Embedded System Module. The kit consists of the standard CPU module, DRAM memory, the carrier card with I/O connectors, an external PSU, and an adapter for mounting a PCI-104 module. The EK01 provides versatile mounting options and can also be installed in a standard PC (including a PCI-104 module). After evaluation, the design overhead for each application is limited to I/O. Depending on the application and quantity it may be necessary to develop a simple carrier card, choose PCI-based standard components, write software drivers for those additional functions, or design a housing. This minimal additional design effort can be carried out by the user or by MEN. The EM02 is an ideal computing platform for embedded industrial PCs under Windows or Linux. It is controlled by an Ultra-Low Power Tualatin Pentium III with 933MHz or an Ultra-Low Voltage Tualatin Celeron Processor with 400MHz. It provides 16KB L1 and 512KB/256KB L2 cache. The EM02 uses the Intel 815G chip set, including graphics. It provides one VGA connector, one USB 1.1 connector Type A and one Gigabit Ethernet interface at the front panel. It also provides 512MB of DRAM and a CompactFlash slot on board. As an alternative to onboard USB, legacy I/O is routed to the carrier board via the J2 system connector of the EM02. It includes a serial interface, (E)IDE, a floppy interface, as well as two PS/2 interfaces for keyboard and mouse. The carrier board has an ATX-compatible format and provides the mechanical platform, the power supply and the I/O connectors. It comes with one ESM slot and three PCI slots, which allow the use of standard extension cards in the PC. It is equipped with USB 2.0 (front), a 9-pin D-Sub for an RS232 serial interface (front) and connectors for IDE and floppy. The ESM carrier also features an I2C EEPROM for the board ID and revision information. DVI/TFT/video are not supported on the EK01 kit but are available on the EM02 itself for implementation as a hub interface on other (custom) carrier cards. Download the datasheet (PDF) Request Quote
EK02 MEN MIKRO ESM Starter Kit with PowerPC Kahlua II MPC8245 Simple Type: CPU Board Embedded System Modules are complete computers on a module. A final ESM-based embedded application consists either of a stand-alone ESM (the power supply connection being sufficient to operate the module), an ESM with an application-specific carrier card and/or an ESM with additionally plugged PCI-104 modules. The EK02 is a starter kit that allows evaluation of the functions of the EM04N Embedded System Module. The kit consists of the standard CPU module, an FPGA loaded with additional I/O functions, the carrier card with I/O connectors, DRAM memory, an external PSU, VGA and RJ45 to D-Sub cables, and an adapter for mounting a PCI-104 module. The EK02 provides versatile mounting options and can also be installed in a standard PC (including a PCI-104 module). After evaluation, the design overhead for each application is limited to I/O. Depending on the application and quantity it may be necessary to develop a simple carrier card, choose PCI-based standard components, load additional or different I/O functions into the FPGA, write software drivers for those additional functions, or design a housing. This minimal additional design effort can be carried out by the user or by MEN. The EM04N is an ideal computer for low-cost deeply embedded solutions in very harsh environments, for machine control, Man-Machine Interfaces, fieldbus bridges or embedded Linux PCs. It is controlled by an MPC8245 PowerPC (Kahlua II) at 400MHz (incl. FPU, MMU). The EM04N provides 256MB DRAM for data storage and a CompactFlash slot for program storage. It comes with two RS232 interfaces and two Fast Ethernet channels at its front panel. As an evaluation example, additional I/O functionality is implemented in the onboard FPGA, comprising a graphics controller with 800x600 resolution, a CAN controller, a quad UART as well as controllers for IDE and touch panel. The physical interfaces for these functions are accessible on the carrier board which is included in the kit. The carrier board has an ATX-compatible format and provides the mechanical platform, the power supply and the I/O connectors. It comes with one ESM slot and three PCI slots, which allow the use of standard extension cards in the PC. It is equipped with USB (front), a 9-pin D-Sub for RS232 or RS422 or RS485 (front) and connectors for IDE, touch, TFT, VGA, and 4 SA adapters. The ESM carrier also features an I2C EEPROM for the board ID and revision information. Download the datasheet (PDF) Request Quote
EK03 MEN MIKRO ESM Starter Kit with Transmeta Crusoe TM5900 Simple Type: CPU Board Embedded System Modules are complete computers on a module. A final application consists either of a stand-alone ESM, an ESM with an application-specific carrier card and/or an ESM with additionally plugged PCI-104 modules. The EK03 is a starter kit that allows evaluation of the functions of the ESM EM05. The kit consists of the CPU module, an FPGA with additional I/O functions, the carrier card, DRAM memory, PSU, VGA and RJ45 to D-Sub cables, and an adapter for mounting a PCI-104 module. The EK03 provides versatile mounting options and can also be installed in a standard PC. After evaluation, the design overhead for each application is limited to I/O. Depending on the application and quantity it may be necessary to develop a simple carrier card, choose PCI-based standard components, load additional I/O functions into the FPGA, write software drivers for those additional functions, or design a housing. The EM05 is a powerful industrial PC designed to operate in harsh environments (-40 to +85°C, shock, vibration, humidity etc.) -- an ideal solution also for infotainment applications. It is controlled by the Crusoe TM5900 from Transmeta, a Pentium-like x86 with an integrated Northbridge. What makes this CPU attractive is its low power consumption of typically 5W at 800MHz and a long-term availability of five years. The EM05 is equipped with 512MB DDR RAM (133MHz) and a CompactFlash slot for scalable program storage. It provides two RS232 interfaces and two Fast Ethernet channels via RJ45 connectors at its front panel. Further I/O deriving from the onboard Super I/O controller such as USB, IDE, PS/2 etc. are routed to the I/O connector of the ESM by means of an FPGA. Additional I/O functionality is implemented in the onboard FPGA, comprising a graphics controller with 800x600 resolution and controllers for IDE, SPI and GPIO. The physical interfaces are accessible on the carrier board which is included in the kit. The ATX-compatible carrier board provides the mechanical platform, the power supply and the I/O connectors. It comes with one ESM slot and three PCI slots, which allow the use of standard extension cards in the PC. It is equipped with USB (front), a 9-pin D-Sub for RS232 or RS422 or RS485 (front) and connectors for IDE, floppy, PS/2, TFT, and VGA. Optionally, the floppy can be replaced by 4 SA adapters. Thus, further serial lines and CAN would be available via FPGA on the carrier. The ESM carrier also features an I2C EEPROM for the board ID and revision information. Download the datasheet (PDF) Request Quote
EM02 MEN MIKRO ESM with Tualatin Pentium III Simple Type: CPU Board The EM02 is a complete embedded single-board computer for use on any carrier board in different industrial environments. The final application consists either of a stand-alone EM02, the EM02 with an application-specific carrier card and/or with additionally plugged PCI-104 modules. The EM02 is controlled by an Ultra-Low Power Tualatin Pentium III with 933MHz or an Ultra-Low Voltage Tualatin Celeron Processor with 400MHz. It provides 16KB L1 cache controlled by processor programmable registers and 512KB/256KB L2 cache for ECC protected cache data array. The EM02 uses the Intel 815G chip set, including graphics. It provides one VGA connector, one USB connector Type A and one Gigabit or one Fast Ethernet interface at the front panel. It also has an SO-DIMM socket and a CompactFlash interface on board. As an alternative to onboard USB, legacy I/O is routed to the carrier board via the J2 system connector of the EM02. It includes a serial interface, (E)IDE, a hub interface for DVI/TFT/video, a floppy interface, as well as two PS/2 interfaces for keyboard and mouse. The EM02 is an ideal computing platform for embedded industrial PCs, offering the whole world of Windows and Linux based software, e.g. for infotainment applications. For a first evaluation of the functions of the EM02 it is strongly recommended to use the EK01 ESM starter kit. The kit consists of the standard CPU module, the carrier card with I/O connectors, an external PSU, and an adapter for mounting a PCI-104 module. ESM modules are complete computers on a plug-on module. They consist of the hardware (CPU, chip set, memory, I/O) which is not fixed to any application-specific function, and an FPGA programmed in VHDL code, which provides I/O that is also still independent of a specific application. ESM modules are based on PCI. They have two system connectors: J1 has a fixed signal assignment, while J2 is variable depending on the final application-specific configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. Download the datasheet (PDF) Request Quote
EM04 MEN MIKRO ESM with PowerPC MPC 8245 Simple Type: CPU Board The EM04 is a complete embedded single-board computer for use on any carrier board in different industrial environments. The final application consists either of a stand-alone EM04, the EM04 with an application-specific carrier card and/or with additionally plugged PCI-104 modules. The EM04 is controlled by an MPC8245 PowerPC (Kahlua II) microprocessor which operates at 266MHz up to 400MHz. The MPC8245 includes a Floating Point Unit and a Memory Management Unit. The EM04 has an SO-DIMM socket for data and a CompactFlash slot for program storage. At its front panel the EM04 provides two RS232 interfaces and two Fast Ethernet channels. Additionally, nearly unlimited I/O functionality such as graphics controllers, serial interfaces, CAN bus controller etc. can be realized in a very flexible and cost-effective way by means of an onboard FPGA. Physical interfaces for such functions must be implemented on the carrier board. The EM04 is an ideal computer for low-cost deeply embedded solutions in very harsh environments, for machine control, Man-Machine Interfaces, field-bus bridges or embedded Linux PCs. For a first evaluation of the functions of the EM04 it is strongly recommended to use the EK02 ESM starter kit. The kit consists of the standard CPU module, an FPGA loaded with additional I/O functions, the carrier card with I/O connectors, an external PSU, VGA and RJ45 to D-Sub cables, and an adapter for mounting a PCI-104 module. ESM modules are complete computers on a plug-on module. They consist of the hardware (CPU, chip set, memory, I/O) which is not fixed to any application-specific function, and an FPGA programmed in VHDL code, which provides I/O that is also still independent of a specific application. ESM modules are based on PCI. They have two system connectors: J1 has a fixed signal assignment, while J2 is variable depending on the final application-specific configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. Download the datasheet (PDF) Request Quote
EM04N MEN MIKRO Men Mikro EM04N ESM with PowerPC Kahlua II Simple Type: CPU Board The EM04N is a complete embedded single-board computer for use on any carrier board in different industrial environments. The final application consists either of a stand-alone EM04N, the EM04N with an application-specific carrier card and/or with additionally plugged PCI-104 modules. The EM04N is controlled by an MPC8245 PowerPC (Kahlua II) microprocessor which operates at 266MHz up to 400MHz. The MPC8245 includes a Floating Point Unit and a Memory Management Unit. The EM04N has an SO-DIMM socket for data and a CompactFlash slot for program storage. At its front panel the EM04N provides two RS232 interfaces and two Fast Ethernet channels. Additionally, nearly unlimited I/O functionality such as graphics controllers, serial interfaces, CAN bus controller etc. can be realized in a very flexible and cost-effective way by means of an onboard FPGA. Physical interfaces for such functions must be implemented on the carrier board. Download the datasheet (PDF) Request Quote
EM05 MEN MIKRO ESM with Transmeta Crusoe TM5900 Simple Type: CPU Board The EM05 is a complete embedded single-board computer for use on any carrier board in different industrial environments. The final application consists either of a stand-alone EM05, the EM05 with an application-specific carrier card and/or with additionally plugged PCI-104 modules. The EM05 is controlled by the Crusoe TM5900 microprocessor from Transmeta, a Pentium-like x86 with an integrated Northbridge that operates at 800MHz. What makes this CPU especially attractive is its extremely low power consumption of typically 5W at 800MHz and a long-term availability of five years. The EM05 is equipped with an onboard 133MHz fast DDR RAM SO-DIMM socket for data and a CompactFlash slot for scalable program storage. At its front panel the EM05 provides two RS232 interfaces and two Fast Ethernet channels via RJ45 connectors or 9-pin D-Sub connectors. Further I/O deriving from the onboard Super I/O controller such as USB, IDE, PS/2 etc. can be routed to the I/O connector of the ESM by means of an FPGA -- with the corresponding connectors available on a carrier board. In the same flexible way, additional functionality such as serial interfaces, CAN bus controllers, protocol converters, touch controller etc. can also be realized in the FPGA to the needs of the individual application. The functionality of the FPGA is dynamically loaded by the application software. The EM05 is a powerful yet low-cost industrial PC which is designed to operate in harsh environments -- an ideal solution also for infotainment applications. For a first evaluation of the functions of the EM05 it is strongly recommended to use the EK03 ESM starter kit. The kit consists of the standard CPU module, an FPGA loaded with additional I/O functions, the carrier card with I/O connectors, an external PSU, VGA and RJ45 to D-Sub cables, and an adapter for mounting a PCI-104 module. ESM modules are complete computers on a plug-on module. They consist of the hardware (CPU, chip set, memory, I/O) which is not fixed to any application-specific function, and an FPGA programmed in VHDL code, which provides I/O that is also still independent of a specific application. ESM modules are based on PCI. They have two system connectors: J1 has a fixed signal assignment, while J2 is variable depending on the final application-specific configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. Download the datasheet (PDF) Request Quote
EM07NR01 MEN MIKRO Men Mikro EM07NR01 5886-0023 Mezzanine Card | With 4 LAN Ports Simple Type: Mezzanine Card Request Quote
EM1A MEN MIKRO Men Micro EM1A SBC – onboard I/O, PowerPC, MPC5200B/384MHz, 256 MB DDRAM SDRAM, NAND Flash, 2 MB NVRAM, 2 Fast Ethernet, 1 COM, 1 USB on J3 rear I/O connector; 2 CAN, graphics, serial lines etc. via FPGA, Altera Cyclone II for user-defined I/O functions, Linux, VxWorks, QNX, PikeOS, Automation control, railways, medical Simple Type: - TBD - Request Quote
EM1N MEN MIKRO Men Micro EM1N SBC – front I/O, PowerPC, MPC5200B/384MHz, 256 MB DDRAM SDRAM, NAND Flash, 2 MB NVRAM, 2 Fast Ethernet, 1 COM, 1 USB (front); 2 CAN, graphics, serial lines etc. via FPGA, Altera Cyclone II for user-defined I/O functions, Linux, VxWorks, QNX, PikeOS, Automation control, railways, medical Simple Type: - TBD - Download the datasheet (PDF) Request Quote
EM4N MEN MIKRO Men Micro EM4N SBC – front I/O, PowerPC, MPC8245/400MHz, 512 MB DRAM, CompactFlash, 2 Fast Ethernet, 2 COMs, graphics, further COMs, CAN, IDE via FPGA, Altera Cyclone for user-defined I/O functions, Linux, VxWorks, Automation control Simple Type: - TBD - Request Quote
EM7N MEN MIKRO Men Micro EM7N SBC – front I/O, Tualatin ULP Pentium III / 933MHz, Tualatin ULV Celeron / 650MHz, 512 MB DRAM, CompactFlash, 2 Fast Ethernet, 2 COMs (front); graphics, 2 USB, (E)IDE (carrier); further I/O via FPGA, Altera Cyclone for user-defined I/O functions, Windows, Linux, QNX, VxWorks, Automation control Simple Type: - TBD - Request Quote
EM9 MEN MIKRO Men Micro EM9 SBC – front I/O, PowerPC MPC8548/1.33GHz, down to MPC8543/800MHz, 2 GB DDR2 SDRAM, 1 GB NAND Flash, 128 KB FRAM, 3 Gigabit Ethernet, 1 COM, further I/O in FPGA, Altera Cyclone II for user-defined I/O functions, Linux, VxWorks, QNX, INTEGRITY, Automation control, industrial communication, robotics Simple Type: - TBD - Request Quote
EM9A MEN MIKRO Men Micro EM9A SBC – onboard I/O PowerPC MPC8548/1.33GHz, down to MPC8543/800MHz, 2 GB DDR2 SDRAM, 1 GB NAND Flash, 128 KB FRAM, 3 Gigabit Ethernet, 2 COMs, further I/O in FPGA, Altera Cyclone II for user-defined I/O functions, Linux, VxWorks, QNX, INTEGRITY (on request), Automation control, industrial communication, robotics Simple Type: - TBD - Request Quote
ESM MEN MIKRO MEn Mikro ESM Men Micro ESM - Embedded System Modules. Must select model number. Ask your Vox Technologies sales Rep for assistance. Simple Type: CPU Board Download the datasheet (PDF) Request Quote
F10 MEN MIKRO Men Mikro F10 Series 3U CompactPCI/PXI Pentium M Single Board Computers Simple Type: CPU Board Request Quote
F11 MEN MIKRO Men Mikro F11 Series 3U CompactPCI/PXI Pentium III Single Board Computers Simple Type: CPU Board Request Quote
F14 Series MEN MIKRO Men Mikro F14 Series 3U CompactPCI/Express Intel Pentium M CPU Boards Simple Type: CPU Board Request Quote